AMP's clamping pad system utilizes different clamping pad firmness based on moulding hardness and decorative finishes. Available in soft, medium and hard, the system provides the following application benefits.
The Positive-Placement Clamp is our latest clamp attachment design to improve clamping hold by incorporating pre-drilled positioning points throughout the vertical clamp design.
It's spring-loaded pull pin locking mechanism eliminates slippage, wear on vertical road and quickly allows operators to adjust from different clamping heights without the need of consistently loosing and re-tightening handle assembly.
Used with AMP's U-200 (VNA2M200) Underpinner U-300 Underpinner (Former Model VN2+1/Minigraf 3), AMP's U-300P (VN4L) (Former Model VN4L).
For ordering, using part number 41-221.
|04-026||Blue Replacement Pad for SW|
|04-025||Yellow Replacement Pad for MW|
|04-024||Black Replacement Pad HW|
|04-023||Magnetic, Single Metal Pressure Plate|
|04-020||Single Metal Pressure Plate|
|04-022||Double Metal Pressure Plate|
Replacement Pad SW
Shown with different Clamping Mechanisms with Single and Double Mounting Pads