Saw Blades & Sharpening
Softwood | Hardwood | MDF | Polystyrene | Aluminum Frames
Soft & Hardwood: Our 4+1 saws' tooth design is perfectly engineered for all soft and hardwood mouldings— plus all composite materials — to produce a smooth, chip-free edge. This market-exclusive blade deisgn and geometry is only available through Atlas Saw & Tool.
MDF: With foil-wrapped mouldings, our unique sheer face design makes this an excellent choice for cutting MDF materials.
Polystyrene: Our hollow face design is specifically manufactured to cut polystyrene picture frame mouldings and is engineered to eliminate melted burr formation and reduce residue buildup.
Aluminum: Using a series of saw blades with special grade of carbide and unique tooth geometry, this design is ideally suited for cutting thin walled aluminum picture frame mouldings. Suited for dry cut processing or use with mist coolant, depending on frame thickness.
| More Teeth |
Fewer Teeth |
| Smoother finished edges | Faster cutting |
| Better for thin materials | Better for thick materials |
| Slower cutting | Lighter, easier to push feeds |
| Increased heat build-up at the tip | Cooler running tips for longer-sharp life |
| Thin Kerf |
Standard Kerf |
| Saves on operating power | Straighter cuts |
| Reduces material waste | Heavy duty cutting requirements |
| Cuts faster and easier | Requires far greater saw power than a thin kerf |
| Cooler cutting blade tips | Hotter running tips reduces sharp-life |
|
Atlas Saw Sell Sheet |
Zero Turn Services Program |
| Item No. | Diameter | Kerf | Plate | Tooth No. | Arbor | Grind |
| TA-27580ATL | 275 | 3.0 | 2.4 | 80 | 32 | ATBR |
| TA-275100ATL | 275 | 3.0 | 2.4 | 100 | 32 | ATBR |
| TA-30090ABD3 | 300 | 3.0 | 2.4 | 90 | 30 | ATBR |
| TA-350110AB3 | 350 | 3.0 | 2.4 | 110 | 30 | ATBR |
| TA-400120AB3 | 400 | 3.8 | 3.2 | 120 | 30 | ATBR |
| TA-30590ATL | 12" | 3.0 | 2.4 | 90 | 5/8" | ATBR |
| TA-355110AB1 | 14" | 3.8 | 3.2 | 110 | 5/8" | ATBR |
| TA-355110AB3 | 14" | 3.8 | 3.2 | 110 | 30mm | ATBR |
| TA-355110ATL | 14" | 3.0 | 2.4 | 110 | 5/8" | ATBR |
| Item No. | Diameter | Kerf | Plate | Tooth No. | Arbor | Grind |
| TA-30060YHB3"C" | 300 | 3.2 | 2.2 | 60 | 30 | Hollow |
| TA-30060YHB3A | 300 | 3.2 | 2.4 | 60 | 30 | Hollow |
| TA-30560YHB1 | 12" | 3.2 | 2.2 | 60 | 5/8" | Hollow |
| TA-30560YHB1A | 12" | 3.2 | 2.2 | 60 | 5/8" | Hollow |
| TA-35072YHB3 | 350 | 3.2 | 2.2 | 72 | 30 | Hollow |
| TA-35072YHB3A | 350 | 3.2 | 2.4 | 72 | 30 | Hollow |
| TA-35572YHB1 | 14" | 3.2 | 2.2 | 72 | 5/8" | Hollow |
| TA-35572YHB1A | 14" | 3.2 | 2.4 | 72 | 5/8" | Hollow |
| Item No. | Diameter | Kerf | Plate | Tooth No. | Arbor | Grind |
| MP-305100AB2 | 12" | 3.0 | 2.2 | 100 | 5/8" | ATAFR |
| Item No. | Diameter | Kerf | Plate | Tooth No. | Arbor | Grind |
| TA-25596BX1 | 10 | 0.09 | 96 | 5/8" | MTCG | |
| TA-300108BX3 | 300mm | 0.11 | 108 | 30mm | MTCG | |
| TA-305108BX1 | 12 | 0.11 | 108 | 1" | MTCG | |
| TA-305108BX2 | 12 | 0.11 | 108 | 1" | MTCG | |
| TA-355100DN | 14 | 0.13 | 100 | 1" | MTCG |
