Fletcher recommends the use of the 3100 or FSC Cutter when cutting PVC and Corrugated plastics up to 1/2" (13mm).
For PVC materials, Fletcher recommends a single cut up to 6 mm thickness, anything greater than 6mm requires a number of passes to effectively cut the material. When cutting PVC, it is important to cut at a slow, consistent speed, to eliminate cracking of the material and to maintain a good cut edge quality.
Via Marie and Pierre Curie, 3
47122 Forli, Italy |
Customer Service +39 (0)543 78 33 01
8 Audrey Place
Fairfield, NJ 07004 |
Customer Service 973.808.2022
© Copyright 2023 Fletcher-Terry Company, LLC.
All rights reserved. Site designed and hosted by WORX.