Alfamacchine offers the AF-500 Frame Robot System suited for high volume automatic frame joining of moulding and canvas stretcher bars. The system consist of a Vertical Feeder that automatically positions the moulding into the four individually controlled joining stations each inserting V-Nails simultaneoulsy in one or multiple positions per corner. The AF-500 has production joining rates 720 to 900 pieces per hour.
The automatic joining process uses a market unique Vertical Clamping Design for maximum joining performance, production through-put and yield rate. Average cycle time for four corner joining is 4 to 6 seconds based on required V-Nail positions. System is capable of stacking V-Nails depending on application joining requirements.
The system has the capability of handling frame sizes from a minimum of 203mm X 203mm up to a maximum of 762mm x 1194mm size.
Maximum moulding height is 63.5mm and width is 63.5mm. Average set-up time for changing frame size is less than 1 minute excluding the needed set-up time for adding additional V-Nail to storage tray, changing V-Nail size and Nail Heads.
Frame Size Adjustments are programmed through the System’s Software Controller.
Height – Minimum .39" (10mm) to maximum 2.75" (70mm)
Width – Minimum .59" (15mm) to maximum 3.15"(80mm)
Minimum: 8" X 8" (203mm) x (203mm)
Maximum: 30" (762mm) x 47" (1194mm)
If you are an existing FBG Equipment Customer and are looking for Spare Parts, Cutting Blades and Wheels, or equipment accessories, please visit the company’s online store at shop.fletcher-terry.com.
Via Marie and Pierre Curie, 3
47122 Forli, Italy |
Customer Service +39 (0)543 78 33 01
8 Audrey Place
Fairfield, NJ 07004 |
Customer Service 973.808.2022
© Copyright 2023 Fletcher-Terry Company, LLC.
All rights reserved. Site designed and hosted by WORX.