AMP’s brand of V-Nail Fasteners is manufactured with our Power Twist® pulling power designed to improve the 45-degree mitre joint strength for framed art, canvas prints or woodworking assemblies.
The Power Twist® patented design pulls the joint tightly together creating greater performance strength at the corner. Manufactured from high quality steel, the V-Nail strip is applied with a propriety silicone allowing for smooth penetration into the joining material.
AMP’s V-Nails come in various mm sizes with different grinds depending on joining material. Available in small convenient packages or large volume bulk package for use with softwood, hardwood, MDF, and plastic materials.
The Genuine V-Nail product is intended to be used with the company’s Minigraf and U-Series Underpinner equipment. For other manufacturers’ equipment, refer to the Universal V-Nail Product Line.
AMP V-Nails can be used in joining 45 and 90 degree joints, (Butt Joints)
90 degree joining on exterior trim 90 degree Off-set Joining
Material: EN 10132 - Cold rolled narrow steel strip
Finishes: Bright Collation: Silicone Strip V- Nail Type Fastener
Country of origin: Italy or USA – Dual Manufacturing Facilities
|200 nails per strip||160 nails per strip|
|Grind (Nail Type)||58 (SW)
For soft woods and
other soft material
For hard woods and
other hard material
For Medium or High Density Fiber
(MDF or HDF)
|Banak, Bass, Cedar,
Obeche, Poplar, Pine,
soft MDF, soft Plastic
|Ash, Cherry, Hickory,
Maple, Pecan, Ramin,
White Oak, Plastic
|Medium to hard MDF
Red Oak & Walnut
|P/N||Genuine Power Twist® V-Nails - Type 11 for Soft Wood Suited for use with AMP Branded Equipment|
|Not available||H 5mm for Soft wood (5,000 pcs/box)|
|08-337||H 7mm for Soft wood (4,000 pcs/box)|
|08-342||H 10mm for Soft wood (3,000 pcs/box)|
|08-347||H 12mm for Soft wood (3,000 pcs/box)|
|08-352||H 15mm for Soft wood (2,000 pcs/box)|
|Genuine Power Twist® V-Nails - Type 11 for Medium/Hard Wood Suited for use with AMP Branded Equipment|
|08-331||H 3mm for medium / hard wood (7,000 pcs/box)|
|08-332||H 5mm for medium / hard wood (5,000 pcs/box)|
|08-335||H 7mm for medium / hard wood (4,000 pcs/box)|
|08-340||H 10mm for medium / hard wood (3,000 pcs/box)|
|08-345||H 12mm for medium / hard wood (3,000 pcs/box)|
|08-350||H 15mm for medium / hard wood (2,000 pcs/box)|
|Genuine Power Twist® Reinforced V-Nails - Type 11 for MDF Suited for use with AMP Branded Equipment|
|08-334||H 07mm for HDF - (3,200 pcs/box)|
|08-339||H 10mm for HDF - (2,400 pcs/box)|
|08-344||H 12mm for HDF - (2,400 pcs/box)|
|08-349||H 15mm for HDF - (1,600 pcs/box)|
Color Identification Chart
If you are an existing FBG Equipment Customer and are looking for Spare Parts, Cutting Blades and Wheels, or equipment accessories, please visit the company’s online store at shop.fletcher-terry.com.
Via Marie and Pierre Curie, 3
47122 Forli, Italy |
Customer Service +39 (0)543 78 33 01
8 Audrey Place
Fairfield, NJ 07004 |
Customer Service 973.808.2022
© Copyright 2023 Fletcher-Terry Company, LLC.
All rights reserved. Site designed and hosted by WORX.