Albin, A Fletcher Company
Alfamacchine, A Fletcher Company
Fletcher, A Fletcher Company
AMP, A Fletcher Company
Picture Perfect, A Fletcher Company
Home  //  Products  //  AMP MN-355 Double Mitre Saw

AMP’s MN-355 is a Heavy Duty Double Mitre Saw designed to cut 45° mitre joints in Wood, MDF, Plastics and Aluminum Materials. The MN-355 can cut materials up to 6" wide and 4" high. The heavy duty design is achieved using precision machined cast components for saw head, pivot assembly and motor base.

All portions of the saw base are fabricated with a heavy gauge steel and normalized, a metallurgical process to ensure all stress is removed before machining and drilling for saw cutting heads and guide fence.

The cutting process is foot pedal actuated for production output speed, and minimizes reliance on operator for consistent, accurate and repeatable cutting.

The MN-355 Saw System consists of a 1.5Hp motor, vertical clamps, 96" manual measuring table and a set of Tenryu Saw Blades.

Production Capacity - Up to 800 Cuts/Hour

Single Motion Cycle - (2) Cuts per Cycle

Sold in USA only.


Machine Dimensions and Weight
  • Saw Dimensions: 48"L x 24"W x 54"H
  • Manual Measuring Table Dimensions: 120"L x 12"W x 12"H
  • Saw Weight: 500 lbs
  • Manual Measuring Table Weight: 235 lbs
Product Configuration and Part Numbers
P/N Description
04-231 MN-355 - 1.5Hp (Includes 96" Measuring Table, Vertical Clamps, Set of Saw Blades
04-230 MN-355 - 1.5 HP with Clamps (No blades include)
04-232 MN-355 - 1.5 HP with Inverter and Clamps (No blades include)
02-228 AG 2000 - M - Cut Measurement System
Safety Features
  • Voltage Overload Protection
  •  Guarding for Foot-Pedal, Drive Belts and Saw Blades
  • Totally enclosed Fan Cooled Motors
  • OSHA required NEMA-12 oil-tight Electric Circuitry Control
Electrical and Pneumatic Requirements
  • Electrical requirements 230VAC / 3Phase / 60Hz / 15FLA
  • Pneumatic requirements 85PSI / 3CFM
  • Air Filter/Regulator/Lubricator
Accessory Items
P/N Description
04-222 Vertical Pneumatic Clamp Set
04-223 Horizontal Pneumatic Clamp Set (recommended for metal cutting)
04-224 Blade Lube System - Non Staining Formula
Sales and Technical Documents
               MN-355 AMPsellsheet_10_17_17_Page_1.jpg                                          

Unique Performance Features

  • Timing belt driven saw blades with precision machined spindles and double bearing support
  • Adjustable Saw Feed Rate Control
  • Dual magnetic motor starter with pushbutton control
  • Balanced and Pinned Saw Blade Assemblies for quiet production operations


Shown with the AG-2000-M Cut Measurement System


Technical Data

  • Blade Diameter: 355mm
  • Arbor Diameter: 0.625" (15.87mm)
  • Blade Motor: 1.5HP / 3450RPM / TEFC
  • Blade Speed: 12,000 SFM